3Com MSR 30, MSR 50 manual Ip netstream aggregation, Source-prefix

2296 CHAPTER 151: NETSTREAM CONFIGURATION COMMANDS

Parameter inbound: Enables NetStream statistics in the inbound direction of an interface.

outbound: Enables NetStream statistics in the outbound direction of an interface.

Description Use the ip netstream command to enable NetStream statistics in the inbound or outbound direction of the interface.

Use the undo ip netstream command to disable Netstream statistics in the inbound or outbound direction of the interface.

By default, NetStream statistics is disabled in both directions of the interface.

Example # Enable NetStream statistics in the inbound direction of interface Ethernet 1/0.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] ip netstream inbound

ip netstream aggregation

Syntax	ip netstream aggregation { as destination-prefix prefix protocol-port
	source-prefix }
View	System view
Parameter	as: AS aggregation by combination of source AS number, destination AS number,
	inbound interface index, and outbound interface index.
	destination-prefix: Destination-prefix aggregation by destination AS number,
	destination address mask length, destination prefix, and outbound interface index.
	prefix: Source and destination prefix aggregation by combination of source AS
	number, destination AS number, source address mask length, destination address
	mask length, source prefix, destination prefix, inbound interface index, and
	outbound interface index.
	protocol-port: Protocol-port aggregation by combination of protocol number,
	source port, and destination port.
	source-prefix: Source-prefix aggregation by combination of source AS number,
	source address mask length, source prefix, and inbound interface index.
Description	Use the ip netstream aggregation command to enter NetStream aggregation
	view.
	In NetStream aggregation view, you can enable or disable the aggregation mode,
	set information about source interface, destination IP address and destination port
	number for version 8 UDP packets.

Related command: enable, ip netstream export host, ip netstream export source.