3Com MSR 30, MSR 50 manual Display atm pvc-group, Vpi/Vci, Pvc-Name, State

296CHAPTER 19: ATM CONFIGURATION COMMANDS

Table 25 Description on the fields of the display atm map-info command

Field	Description
IP & Mask	Protocol type
State UP	Map entry state
100.11.1.1, mask 255.255.0.0	Protocol address
Vlink 1	Virtual link number

display atm pvc-group

Syntax display atm pvc-group[ interface interface-type interface-number [ pvc { pvc-name [ vpi/vci ] vpi/vci } ] ]

View Any view

Parameter interface-typeinterface-number: Interface type and interface number.

pvc-name: PVC name, a unique string of 1 to 16 characters on ATM interface, not case-sensitive. The name cannot be the same as a valid VPI/VCI value pair. For example, the name 1/20 is not allowed.

vpi/vci: VPI/VCI pair. VPI is short for virtual path identifier; its value ranges from 0 to 255. VCI is short for virtual channel identifier; its value range varies by interface type. Normally, VCI values from 0 to 31 are reserved for special purpose, you are not recommended to use them. For details regarding the value range, refer to Table 28.

Description Use the display atm pvc-groupcommand to view the information about PVC-Group.

Note that:

■If no interface is specified, the system displays PVC-Group information on all ATM interfaces.

■If the PVC name or the VPI/VCI value pair is not specified, the system displays information of all PVC-Groups on the specified ATM interface.

Example # Display the information about PVC-Group on all ATM interfaces.

<Sysname> display atm pvc-group
VPI/VCI	PVC-NAME	STATE	ENCAP PROT		INTERFACE	GROUP
1/32	aa	UP	SNAP	IP	Atm11/0(UP)	1/32
1/33		UP	SNAP	IP	Atm11/0(UP)	1/32
3/34		UP	SNAP	IP	Atm11/0(UP)	1/32
Table 26 Description on the fields of the display atm pvc-group command
Field		Description
VPI/VCI		VPI/VCI value pair
PVC-NAME		PVC name
STATE		PVC state