3Com MSR 30, MSR 50 manual Apply local-preference, Apply mpls-label, Related commands route-policy

1192 CHAPTER 78: ROUTING POLICY COMMON CONFIGURATION COMMANDS

apply local-preference

Syntax apply local-preference preference

undo apply local-preference

View Routing policy view

Parameters preference: BGP local preference, in the range 0 to 4294967295.

Description Use the apply local-preferencecommand to apply the specified local preference to BGP routes.

Use the undo apply local-preferencecommand to remove the clause configuration.

No local preference is set for BGP routing information by default.

Related commands: route-policy.

Examples # Create routing policy policy1 with node 10, matching mode as permit. If a route matches AS-path-ACL 1, set the local preference for the route to 130.

<Sysname> system-view

[Sysname] route-policy policy1 permit node 10

[Sysname-route-policy] if-match as-path 1

[Sysname-route-policy] apply local-preference 130

apply mpls-label

Syntax apply mpls-label

undo apply mpls-label

View Routing policy view

Parameters None

Description Use the apply mpls-labelcommand to set MPLS label for routing information.

Use the undo apply mpls-labelcommand to remove the clause configuration.

No MPLS label is set by default.

If MPLS label failed to apply, the routing information can not be advertised.

Examples # Create routing policy policy1 with node 10, matching mode as permit. If a route matches AS-path-ACL 1, set MPLS label for the route.