3Com MSR 30, MSR 50 manual Peer route-policy IPv6 address family view

1258 CHAPTER 82: IPV6 BGP CONFIGURATION COMMANDS

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv6-family

[Sysname-bgp-af-ipv6] peer 1:2::3:4 route-limit 10000

peer route-policy (IPv6 address family view)

Syntax peer { group-name ipv4-address ipv6-address } route-policyroute-policy-name

{import export }

undo peer { group-name ipv4-address ipv6-address } route-policyroute-policy-name { import export }

View IPv6 address family view

Parameters group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters. ipv4-address: IPv4 address of a peer.

ipv6-address: IPv6 address of a peer.

route-policy-name: Specifies route-policy name, a string of 1 to 19 characters.

import: Applies the routing policy to routes from the peer (group).

export: Applies the routing policy to routes to the peer (group).

Description Use the peer route-policycommand to apply a routing policy to routes incoming from or outgoing to a peer or peer group.

Use the undo peer route-policycommand to remove the configuration.

By default, no routing policy is specified for the peer (group).

Use of the peer route-policycommand does not apply the if-match interface clause defined in the routing policy. Refer to if-match interface on page 1200.

Examples # Apply the routing policy test-policy to routes received from the peer group test.

<Sysname> system-view

[Sysname] route-policy test-policy permit node 10 [Sysname-route-policy] if-match cost 10

[Sysname-route-policy] apply cost 65535

[Sysname-route-policy] quit [Sysname] bgp 100 [Sysname-bgp] ipv6-family

[Sysname-bgp-af-ipv6] group test external

[Sysname-bgp-af-ipv6] peer test route-policy test-policy import

peer route-update-interval (IPv6 address family view)

Syntax peer { ipv6-group-name ipv6-address } route-update-intervalseconds