3Com MSR 30, MSR 50 History-command max-size, # Terminate the connection with user interface VTY

2460 CHAPTER 164: USER INTERFACE CONFIGURATION COMMANDS

■For TTY user interfaces, the value range varies with devices, and normally starts from 1.

■For VTY user interfaces, the value ranges from 0 to 4.

Description Use the free user-interfacecommand to disconnect with the specified user interface.

Note that you cannot use this command to terminate your own connection.

Example # Terminate the connection with user interface VTY1.

<Sysname> free user-interface vty 1

Are you sure to free user-interface vty1? [Y/N]:y

<Sysname>

# Terminate the connection with user interface VTY 0.

<Sysname> free user-interface vty 0

% Not allowed to clear current UI!

history-command max-size

Syntax history-command max-size size-value

undo history-command max-size

View User interface view

Parameter size-value: History buffer size in the range 0 to 256. It defaults to 10, that is, up to ten history commands can be stored.

Description Use the history-commandmax-sizecommand to set the size of history command buffer of the current user interface.

Use the undo history-commandmax-sizecommand to restore the default, or 10.

Example # Set the size of the history command buffer to 20.

<Sysname> system-view

[Sysname] user-interface console 0

[Sysname-ui-console0] history-command max-size 20

idle-timeout

Syntax idle-timeoutminutes [ seconds ]

undo idle-timeout

View User interface view