Manuals / Harman-Kardon / Home Audio / Stereo Receiver

Harman-Kardon HK 3485 Dim Function, Processor Reset, Memory, VFD FULL Normal brightness

Models: HK 3485

1 28
Download 28 pages 5.99 Kb
Page 24
Image 24
Dim Function

OPERATION

Dim Function

Some people find the front-panel messages distracting and would prefer to dim them or turn them off altogether.

To dim the display, press the Dim Button on the front panel or remote. Each button press will cycle through the three settings of:

VFD FULL: Normal brightness

VFD HALF: Display is dimmed but still visible; the light inside the volume knob goes dark

VFD OFF: Display goes completely dark except for Power Indicator to remind you that the receiver is turned on

Processor Reset

If you wish to fully reset the HK 3485 to its factory defaults, or if it behaves erratically after a power surge, first turn the Master Power Switch off and unplug the AC power cord for at least three minutes. Plug the cord back in and turn the receiver back on. If this doesn’t help, you may want to try a system reset.

NOTE: A system reset erases all user configurations, including tuner presets. After a reset, you will need to re-enter all of these settings.

Place the receiver in Standby mode by pressing the Power Switch so that the Power Indicator turns amber. Press and hold the front-panel Mute Button for at least five seconds until the RESET message appears in the display.

If the receiver still does not function correctly after a processor reset, contact an authorized Harman Kardon service center for assis- tance. Service centers may be located by visiting our Web site at www.harmankardon.com.

Memory

If the HK 3485 is unplugged or experiences a power outage, it will retain user settings indefinitely.

24

Page 23 Page 25
Page 24
Image 24
Harman-Kardon HK 3485 owner manual Dim Function, Processor Reset, Memory, VFD FULL Normal brightness, Operation
Page 23 Page 25

FAQ

How do I dim the display on the HK 3485?

To dim the display, simply press the Dim Button on the front panel or remote to cycle through different brightness settings.

How can I reset the HK 3485 to factory defaults?

Turn off the Master Power Switch, unplug the AC power cord for at least three minutes, then plug it back in and turn the receiver back on. If needed, perform a system reset by placing the receiver in Standby mode and holding the front-panel Mute Button for at least five seconds.

How long does the HK 3485 retain user settings?

The HK 3485 retains user settings indefinitely, even if unplugged or experiencing a power outage.