Remote Control Device Types, Tape | Harman-Kardon HK 3485 specs

INSTALLATION

Table 2 – Remote Control Device Types

	Source Input	Remote Control Device Type

	Phono	Operates HK 3485 only

	Video 1	Harman Kardon DVD player

	Video 2	Harman Kardon DVD player

	Video 3	Harman Kardon DVD player

	Tape/CDR	Harman Kardon CD recorder

	CD	Harman Kardon CD player

	AM/FM	Operates HK 3485 only

We recommend you follow the guidelines in Table 2 when connecting various source components to the HK 3485. However, due to the limitations in the design of the HK 3485 remote control, when using source components manufactured by other brands, you may need to use the device’s original remote control to operate it. Alternatively, you may wish to consider purchasing the Harman Kardon TC 30 activity- based remote control, which is custom-programmed by accessing a vast Internet library of remote control codes for numerous brands and types of products.

For each audio-only source, such as a CD player, simply connect the left and right analog audio outputs of the source device to the correspon- ding inputs on the HK 3485. For audio/video devices, such as a cable television set-top box, in addition to the audio connections, connect the composite video output on the set-top box to the corresponding video input jack on the HK 3485.

Phono (Turntable)

Connect the audio outputs of your turntable or tone arm with a moving- magnet (MM-type) cartridge to the Phono Inputs, and connect the ground wire to the Ground Terminal immediately above the Phono Inputs (not the AM Antenna Ground Terminal). If the cartridge is a moving-coil (MC-type) cartridge, it requires a separate phono preamp (available at your local electronics store) before you connect it to the Phono Inputs. See Figure 12.

Figure 12 – Phono Inputs and Ground

If your turntable has an MM-type cartridge and a built-in phono preamp, do not connect it to the Phono Inputs. Use one of the other available audio input sources on the HK 3485.

Compact Disc (CD) Player

Connect the analog audio outputs of your CD player (or another audio- only device) to the CD Audio Inputs. See Figure 13.

Figure 13 – CD Audio Inputs

Tape

The Tape source is used for audio recorders, such as a CDR, MiniDisc or cassette deck.

Connect the output jacks on your recorder to the Tape Audio Input jacks on the HK 3485, and the input jacks on your recorder to the Tape Output jacks on the HK 3485. See Figure 14.

Figure 14 – Tape/CDR Audio Inputs and Outputs

If your tape deck is a three-head unit or has off-head playback capability, you may monitor recordings by repeatedly pressing the Tape Source Selector on the front panel or remote until the dot to the left of the Tape Input Indicator in the front-panel display flashes.

Video 1 Source

Since this source includes audio and video recording output jacks, it is best suited to a video recorder, such as your VCR or DVR, even though the remote codes are programmed to operate a DVD player. Simply use your video recorder’s original remote or the Harman Kardon TC 30.

Connect your recorder to the Video 1 Audio Inputs and Outputs. Then connect the recorder to the Video 1 Composite Video Input and Output. See Figure 15.

Figure 15 – Video 1 A/V Inputs and Outputs

Remember to connect the audio and video output jacks on your recorder to the Video 1 Input jacks on the HK 3485, and the audio and video input jacks on your recorder to the Video 1 Output jacks on the HK 3485.

HK 3485 specifications

The Harman-Kardon HK 3485 is a high-performance stereo receiver that epitomizes the essence of premium audio engineering. Designed for audiophiles and casual listeners alike, this device integrates an array of advanced technologies to deliver an exceptional listening experience.

One of the standout features of the HK 3485 is its robust power output, delivering 120 watts per channel at 8 ohms. This ample power ensures that listeners can enjoy a full range of sound dynamics, whether they are blasting their favorite tracks or enjoying a more subtle acoustic performance. The receiver’s sophisticated power amplifier section is designed to provide listening at high volumes without the distortion commonly associated with lower-quality amplifiers.

The Harman-Kardon HK 3485 incorporates a variety of audio inputs, including traditional analog connections as well as digital inputs for modern devices. It features a high-quality built-in phono preamp, ideal for vinyl enthusiasts looking to connect their turntables directly. In addition to its versatility with inputs, the receiver also supports FM and AM radio, enabling users to tune into their favorite radio stations and enjoy music without needing a streaming service.

This receiver is equipped with Harman-Kardon’s proprietary technologies, such as their advanced circuitry that minimizes interference and enhances audio clarity. The receiver's tonal balance control allows users to customize their listening experience based on their preferred sound profiles, accommodating a wide range of genres from deep bass-heavy tracks to high-fidelity classical music.

Another key characteristic of the HK 3485 is its aesthetic design. The receiver showcases a sleek, modern look with a user-friendly interface that includes an informative LCD display for easy navigation through options and settings. The well-rounded remote control adds convenience, allowing users to adjust the volume and switch inputs without needing to get up.

Overall, the Harman-Kardon HK 3485 stands out not just for its performance but for its blend of classic and contemporary features that cater to a variety of listening preferences. With its stellar sound quality, versatile connectivity options, and intuitive design, the HK 3485 is a commendable choice for anyone looking to elevate their audio experience. Whether it is used for home theater systems or dedicated stereo setups, this receiver undoubtedly leaves a lasting impression.

Harman-Kardon HK 3485 Remote Control Device Types, Phono Turntable, Compact Disc CD Player, Tape

Models: HK 3485