OPERATION

Figure 30 – Balance Control

The Balance Control reduces the level of the speaker opposite the pointer. For example, turning the knob from the midpoint toward “R” reduces the level of the left speaker, leaving the right speaker unaffected. If two pairs of speakers are connected to the HK 3485, then both will be affected.

Headphones

Plug the 1/4" plug on a pair of headphones into the headphone jack on the front of the receiver for private listening. See Figure 31.

Figure 31 – Headphone Jack

Speaker 1/2

The HK 3485 may be used with up to two pairs of speakers for addi- tional sound power in the main listening room, or if you wish to place the second pair of speakers in another room, or even outdoors (when you select weather-resistant loudspeakers). Select each pair of speakers by pressing its associated button on either the front panel or remote. See Figure 32.

Figure 32 – Speaker 1/2 Buttons

Press the button a second time to deactivate that pair of speakers. You may activate both speaker pairs simultaneously, or deactivate both pairs for private listening through the headphones.

Source Selection

Select a source device connected to the HK 3485 for playback by pressing its associated button on the front panel or remote control. See Figure 33.

NOTES:

•The HK 3485 is not an audio/video surround sound receiver. It is only capable of playing source programs in one- or two- channel formats, and any information encoded in additional channels will be lost. The HK 3485 is not equipped with digital audio inputs, and cannot decode digital surround sound programs. If you have connected the analog audio and composite video outputs of a DVD player to the HK 3485, remember to select two-channel audio in the DVD player and disc menus.

•The HK 3485 does not switch the last-selected video source when an audio-only source, such as Phono, CD or Tape/CDR, is selected subsequently. It is not possible to view video while listening to an audio-only source.

•You may select a device connected to either the front- or rear-panel Video 3 Inputs. Press the front-panel or remote Video 3 Source Selector repeatedly to toggle between the front- and rear-panel Video 3 Inputs, and observe the front- panel display indicators. When the dot to the left of the Video 3 Indicator is lit steadily, the rear-panel inputs have been selected. When the dot flashes, the front-panel inputs are active. When the front-panel inputs are not in use, you may snap the supplied cover over them. Remove the cover by pressing on the left side until it pivots outward.

•Similarly, if you have connected a three-head tape deck to the Tape/CDR Inputs, you may monitor a recording while it is being made so that you can confirm that the correct program material is being recorded and make any necessary adjustments to the recording level. When a recording is being made, the dot to the left of the source being recorded will be lit. Press the T-Mon Button on the front panel to hear playback from the tape deck’s playback head. When the recording is being monitored, the dot to the left of the Tape Monitor Indicator will flash. Press the T-Mon Button again to hear the original source.

Using the Tuner

The HK 3485’s built-in tuner may be selected in one of two ways (see Figure 34):

1.Press the front-panel AM or FM Button.

2.Press the AM or FM Button on the remote.

Figure 33 – Source Selectors

To enjoy video sources, make sure to connect the device’s composite video output to the correct Video Input on the HK 3485. In addition, connect the HK 3485’s Video Monitor Output to an input on your televi- sion or video display.

Figure 34 – Tuner Input Selection

Tuner operation requires some special keys, including the Numeric Keys, which are normally hidden behind a door in the lower half of the remote. To access these controls, hold the remote in one hand while grasping the ridged finger holds on the sides of the door with the other hand. Squeeze the door gently as you slide it toward you, revealing the additional controls. See Figure 35.

22

Page 21 Page 23
Page 22
Image 22
Harman-Kardon HK 3485 owner manual Headphones, Speaker 1/2, Source Selection, Using the Tuner
Page 21 Page 23

HK 3485 specifications

The Harman-Kardon HK 3485 is a high-performance stereo receiver that epitomizes the essence of premium audio engineering. Designed for audiophiles and casual listeners alike, this device integrates an array of advanced technologies to deliver an exceptional listening experience.

One of the standout features of the HK 3485 is its robust power output, delivering 120 watts per channel at 8 ohms. This ample power ensures that listeners can enjoy a full range of sound dynamics, whether they are blasting their favorite tracks or enjoying a more subtle acoustic performance. The receiver’s sophisticated power amplifier section is designed to provide listening at high volumes without the distortion commonly associated with lower-quality amplifiers.

The Harman-Kardon HK 3485 incorporates a variety of audio inputs, including traditional analog connections as well as digital inputs for modern devices. It features a high-quality built-in phono preamp, ideal for vinyl enthusiasts looking to connect their turntables directly. In addition to its versatility with inputs, the receiver also supports FM and AM radio, enabling users to tune into their favorite radio stations and enjoy music without needing a streaming service.

This receiver is equipped with Harman-Kardon’s proprietary technologies, such as their advanced circuitry that minimizes interference and enhances audio clarity. The receiver's tonal balance control allows users to customize their listening experience based on their preferred sound profiles, accommodating a wide range of genres from deep bass-heavy tracks to high-fidelity classical music.

Another key characteristic of the HK 3485 is its aesthetic design. The receiver showcases a sleek, modern look with a user-friendly interface that includes an informative LCD display for easy navigation through options and settings. The well-rounded remote control adds convenience, allowing users to adjust the volume and switch inputs without needing to get up.

Overall, the Harman-Kardon HK 3485 stands out not just for its performance but for its blend of classic and contemporary features that cater to a variety of listening preferences. With its stellar sound quality, versatile connectivity options, and intuitive design, the HK 3485 is a commendable choice for anyone looking to elevate their audio experience. Whether it is used for home theater systems or dedicated stereo setups, this receiver undoubtedly leaves a lasting impression.
Top Page Image Contents