TV
| 4 |
1 | 5 |
| |
| 6 |
| 7 |
2 |
|
| POOWWEER |
8 9 10
3
1CI slot 
(p. 46)
2SD Card slot 
(p. 49)
3Headphones jack 
(p. 67)
4Function select
t[Volume] / [Contrast] / [Brightness] / [Colour] / [Sharpness] / [Tint] (NTSC signal) / [Bass] / [Treble] / [Balance] / [Auto Setup] (p. 34, 35)
[Music] or [Speech] mode in the Sound Menu
Using the On Screen Displays - Operation guide
5Channel Up / Down, Value change (when using the F button), Switching the TV On (press either button for about 1 second when in Standby mode)
6Changes the input mode
7Mains power On / Off switch tUse to switch the mains power.
If you turned the TV Off during Standby mode by the remote control last time, the TV will be in Standby mode when you turn the TV On with Mains power On
/Off switch.
8Remote control signal receiver
tDo not place any objects between the TV remote control signal receiver and remote control.
9C.A.T.S. (Contrast Automatic Tracking System)
sensor
tSenses brightness to adjust picture quality when [Eco Mode] in the Picture Menu is set to [On] 
(p. 27)
10Power and Timer LED tRed : Standby
Green : On
Orange : Timer Programming On
Orange (flash) : Recording of Timer Programming or
Direct TV Recording in progress
Red with orange flash : Standby with Timer Programming On or Direct TV Recording
tThe LED blinks when the TV receives a command from the remote control.
Quick Start Guide Identifying Controls
Many features available on this TV can be accessed via the On Screen Display menu.
Operation guide
Operation guide will help you to operate by using the remote control.
Example : [Sound Menu]
Sound Menu | 1/2 | |||||
Mode | Music | |||||
|
|
|
| |||
Bass |
| 0 | ||||
|
|
|
| |||
Treble |
| 0 | ||||
|
|
|
| |||
Balance |
| 0 | ||||
|
|
|
| |||
Headphone Volume |
|
| 11 | |||
|
|
|
| |||
Surround | Off | |||||
|
|
|
| |||
Auto Gain Control | Off | |||||
|
|
| ||||
Volume Correction |
| 0 | ||||
|
|
|
|
|
|
|
Speaker Distance to Wall | Over 30cm | |||||
Select |
| Page up | ||||
|
|
| EXIT |
| ||
| ||||||
|
|
| Change |
| Page down | |
|
|
|
| |||
|
|
| RETURN |
| ||
|
|
|
|
|
| |
Operation guide
How to use remote control
MENU
Open the main menu
Move the cursor / select the menu item
Move the cursor / adjust levels / select from a range of options
Access the menu / store settings after adjustments have been made or options have been set
RETURN
Return to the previous menu
EXIT | Exit the menu system and return to the normal |
| viewing screen |
Auto power standby function
The TV will automatically go to Standby mode in the following conditions :
t no signal is received and no operation is performed for 30 minutes in Analogue TV mode t [Off Timer] is active in the Setup Menu (p. 16)
t no operation is performed for the period selected in [Auto Standby] (p. 33)
tThis function does not affect the recording of Timer Programming and Direct TV Recording.
9
