Roland RS 232C manual Request Commands, 2Q pattern phrase reQuest for AR-2000, = AC ACtive

r

>DO (Display Off parameter for AR-3000)Function: Display Parameter setting Syntax: stxDO: * , * , * , * ;

a b c d

aCard in slot

0Card in slot A

1Card in slot B

bDisplay Sleep

0Off

1On

cSleep Time (0M30S - 59M59S)

4.2.4Request Commands

<2Q (pattern phrase reQuest for AR-2000)

Function: Pattern Phrase setting contents request

Syntax: stx2Q: **** ;

a

a Pattern Phrase number

Note: This is a request for when the phrase type is pattern phrase. (* refer to PU command)

> 3Q (pattern phrase reQuest for AR-3000)

Function: Pattern Phrase setting contents request

Syntax: stx3Q: **** ;

a

a Pattern Phrase number

Note: This is a request for when the phrase type is pattern phrase. (* refer to PS command)

> GQ (sonG phrase reQuest for AR-3000)

Function: Song Phrase setting contents request

Syntax: stxGQ: **** ;

a

a Song Phrase number

Note: This is a request for when the phrase type is song phrase. (* refer to SS command)

= AC (ACtive)

Function: Activity sensing (Verify AR-3000 unit activity)

Syntax: stxAC;

Note: Normally, an ACK command will be output from the AR-3000 by using this command.

During recording , playback or playpause, the Phrase number will be output.

AR-3000 RS-232C Reference -28