Roland RS 232C manual = AQ All reQuest, = CQ Card reQuest, = DQ Direct play reQuest

refer to ME command

Note:

> JQ (midi set up reQuest for AR-3000)Function: MIDI setting contents request Syntax: stxJQ: * ;

a

a Card in slot

0 Card in slot A

1 Card in slot B

Note:

stxIQ: * ; a

a Card in slot

0 Card in slot A

1 Card in slot B

2

refer to MS command

Function: MIDI setting contents request Syntax:

< IQ (mIdi set up reQuest for AR-2000)

Note:

refer to DP command

Function:

Syntax:

r

= AQ (All reQuest)

Function: Reset the Phrase Output Counter

Syntax: stxAQ: * ; a

aCard in slot

0 Card in slot A

1 Card in slot B

2

Note: This sets the Phrase Output Counter to the lowest-numbered phrase of the phrases registered in the card. Use this command before you wish to output the settings of all phrases by using the PQ command, for example when you confirm the initial settings.

= CQ (Card reQuest)

Function: Card setting contents request

Syntax: stxCQ: * ; a

aCard in slot

0 Card in slot A

1 Card in slot B

Note: refer to CS command

= DQ (Direct play reQuest)

Direct Playback setting contents request

stxDQ: * ; a

aCard in slot

0 Card in slot A

1 Card in slot B

AR-3000 RS-232C Reference -29