Roland RS 232C manual Contents, Setup, Overview of Commands, Details of each Command

r

- Contents -

Section1			Introduction	1
1.1	If You Have Been Using the AR-2000			1
Section2			Setup
2.1	About the RS-232C Interface			1
2.1.1		Connector and Cable		1
2.2	Handshaking			1
2.3	Setup Procedure			2
2.4	Connections with the Computer			2
2.5	Computer Settings			2
2.6	AR-3000 Settings			2
2.6.1		Baud Rate		2
Section3			Overview of Commands
3.1	Command Structure			3
3.1.1		Communication Protocol		3
3.1.2		Command Format		5
3.1.3		About Input Parameters		5
3.1.4		About Output Parameters		5
3.2	Precautions			5
Section4			Details of each Command
4.1	Commands Transmitted from the External Device (Computer) to the AR-3000			6
4.2	Details of Commands Sent from the External Device (Computer) to the AR-3000			7

4.2.1Control Commands

PA	Specifying the Playback Phrase	7
PE	Playback Pause / Restart Playback	7
PL	Playback Start	8
RL	Playback from the Middle of a Phrase	8
ST	Halting Playback/Recording	8
AE	Starting Time-Stamped Recording	9
RE	Start Recording	9
RM	Record Ready Mode	10

4.2.2Editing Commands

DM	Enable Execution of Editing Commands	11
CD	Delete Card	11
CP	Copy Card	11
CO	Convert Card	11
FM	Format Card	12
LS	Recorded Phrase Protect Mode	12

AR-3000 RS-232C Reference