r

=TQ (Time stamp reQuest ) Function1: Time Stamp request Syntax: stxTQ: ****;

a

aPhrase number

0 Card in slot A

1 Card in slot B

Note: Output the recording start time information for the specified phrase. (Refer to 4.4.1 TI Command.) The AR-3000 outputs an ER command for phrases in which time Information is not recorded.

Function2: Time Stamp request

If the phrase number is not specified as a parameter, the AR-3000 will output the Time Stamp information for automatically incremented phrase number by the Phrase Output Counter.

Syntax: stxTQ:;

Note: The incremented value will skip phrase numbers which are not recorded yet, and will be up to the next recorded phrase number. If the TQ command is used to request output even after the setting information of the last phrase has been output, the AR-3000 will output “stx ER:101;”.

= UQ (coUnt play reQuest)

Function: Program (Count) Playback setting contents request

Syntax: stxUQ: * , * ;

ab

a Card in slot

0 Card in slot A

1 Card in slot B

b Program Playback patterns(1 - 5)

Note: refer to CE command

= VR (VeRsion)

Function: Version request

Syntax: stxVR;

Note: The AR-3000 will output the “model name” and “version”. (* refer to the 4.4.1 VR command for the AR-3000)

AR-3000 RS-232C Reference -32