r
System Settings
= AC (ACtive)
Function: Active sensing reply
Syntax: stxAC: * , **** ;
a b
aStatus of
0 During playback
1 During recording
2 During recording pause
3 During playback pause
bPhrase number
Note: During Dual Mono Mode, this is output twice. refer to the 4.2.4 AC command
= CE (Count play sEt up)
Function: | Program (Count) Playback setting output | |||
Syntax: | stxCE: * , * , **** , **** , .... , **** ; | |||
|
|
| a b c | c .... c |
| a | Card in slot |
| |
|
| 0 | Card in slot A |
|
|
| 1 | Card in slot B |
|
| b | Program Playback patterns ( 1 - 5 ) | ||
| c | Phrase number to be played back (up to 100 phrases) |
Note: refer to UQ command
= CR (Card Remain)
Function: Card remaining capacity output
Syntax: stxCR: ******* , ******* ;
a b
aRemaining capacity of card A
bRemaining capacity of card B
Note: unit: byte. refer to MQ command
If the card is in
= DC (Display Contrast)
Function: Display Contrast setting output
Syntax: stxDC: *** ;
a
a Display contrast (
Note: refer to LQ command