3Com MSR 30 Display fr pvc-info, 1007, Statistics about data transmitted and received on them

378CHAPTER 22: FRAME RELAY CONFIGURATION COMMANDS

Table 46 Description on the fields of the display fr map-info pppofr command

Field	Description
Fr Interface	Frame relay interface name
DLCI	DLCI number
Fr State	Frame relay state
PPP Interface	Name of the associated PPP virtual template interface
PPP Phase	Phase of the PPP session

display fr pvc-info

Syntax	display fr pvc-info[ interface interface-type { interface-number
	interface-number.subnumber } ] [ dlci-number ]
View	Any view
Parameter	interface interface-type { interface-number interface-number.subnumber }:
	Specifies an interface by its type and number. It can be a main or subinterface. The
	interface-typeargument is an interface type. The interface-numberargument is a
	main interface number. The subnumber argument is a subinterface number, in the
	range 0 to 1023.
	dlci-number:virtual circuit number of frame relay interface. It ranges from 16 to
	1007.
Description	Use the display fr pvc-infocommand to display state information on FR PVCs
	and statistics about data transmitted and received on them.
	If the command is performed with no interface or DLCI specified, the displayed
	information covers all PVCs; if with an interface (a main interface or subinterface)
	specified, the displayed information covers only the PVCs on the interface; and if
	with a DLCI specified, the displayed information covers only the specified PVC.
Related command:	fr dlci.
Example	# Display the frame relay PVC table.
	<Sysname> display fr pvc-info
	PVC statistics for interface Serial2/0 (DTE, physical UP)
	DLCI = 100, USAGE = UNUSED (0000), Serial2/0
	create time = 2000/04/01 23:55:39, status = active
	in BECN = 0, in FECN = 0
	in packets = 0, in bytes = 0
	out packets = 0, out bytes = 0
	DLCI = 102, USAGE = LOCAL (0010), INTERFACE = Serial2/0.1
	create time = 2000/04/01 23:56:14, status = active
	in BECN = 0, in FECN = 0
	in packets = 0, in bytes = 0
	out packets = 0, out bytes = 0