3Com MSR 30 Interface vlan-interface, Related command display interface vlan-interface, Vlan ID

634CHAPTER 39: VLAN CONFIGURATION COMMANDS

Description: VLAN 0003

Tagged Ports: none

Untagged Ports: none

Table 112 Description on the fields of the display vlan command

Field	Description
VLAN ID	VLAN ID
VLAN Type	VLAN type (static or dynamic)
Route interface	Whether the VLAN interface is configured for the VLAN: not
	configured or configured
Description	VLAN descriptive string
Broadcast MAX-ratio	VLAN broadcast suppression ratio (available only on the device
	supporting the broadcast-suppressioncommand)
IP Address	IP address of the VLAN interface (not display if the VLAN interface
	has no IP address configured)
Subnet Mask	Subnet mask of the IP address (not display if the VLAN interface
	has no IP address configured)
Tagged Ports	Tagged ports
Untagged Ports	Untagged ports

interface vlan-interface

Syntax interface vlan-interface vlan-interface-id

undo interface vlan-interface vlan-interface-id

View System view

Parameter vlan-interface-id: VLAN interface ID, in the range of 1 to 4,094.

Description Use the interface vlan-interfacecommand to enter the specified VLAN interface view. Use the undo interface vlan-interfacecommand to delete the specified VLAN interface. The VLAN interface must be created first before entering its view

Before creating a VLAN interface, make sure the corresponding VLAN has been created; otherwise, the VLAN interface cannot be created.

Related command: display interface vlan-interface.

Example # Create VLAN interface 2.

<Sysname> system-view [Sysname] vlan 2 [Sysname-vlan2] quit

[Sysname] interface vlan-interface 2 [Sysname-Vlan-interface2]