3Com MSR 50 Display mpls l2vc, Configured on the router, Configured on the CE interface, 1655

1655

up (3), down (0)
Interface	Encap Type	State	VC Type
Serial2/0	ppp	up	CCC
Serial2/1	ppp	up	bgp-vc
Serial2/2	ppp	up	static-vc

# Display information about interfaces of Kompella L2VPN VCs.

<Sysname> display l2vpn ccc-interface vc-type bgp-vc

Total ccc-interface		of BGP VC: 1
up (1), down (0)
Interface	Encap	Type State	VC Type
Serial2/1	ppp	up	bgp-vc

#Display information about interfaces of SVC L2VPN VCs that are in the state of UP.

<Sysname> display l2vpn ccc-interface vc-type svc-vc up
Total ccc-interface of SVC VC: 1,
up (1), down (0)
Interface	Encap Type	State	VC Type
Serial2/2	ppp	up	static-vc
Table 428 Description on the fields of display l2vpn ccc-interface vc-type
Field		Description
Total ccc-interface of XXX VC		Total interface number of L2VPN VCs of type xxx
Interface		Name of the interface
Encap Type		Encapsulation type of the interface
State		Status of the interface
VC Type		Encapsulation type of the L2VPN VC interface

display mpls l2vc

Syntax	display mpls l2vc [ interface interface-typeinterface-numberremote-info ]
View	Any view
Parameter	interface interface-typeinterface-number: Specifies the interface connecting the
	CE by its type and number.
	remote-info: Specifies Martini VCs from the remote peer.
Description	Use the display mpls l2vc command to display information about Martini VCs
	configured on the router.
	If you specify an interface, the command displays information about Martini VCs
	configured on the CE interface.
Example	# Display information about all Martini VCs configured on the router.
	<Sysname> display mpls l2vc
	total ldp vc : 3	0 up	3 down