3Com MSR 30, MSR 50 manual Redialtimes, Undo redialtimes

2740 CHAPTER 180: VOICE RADIUS CONFIGURATION COMMANDS

redialtimes

Syntax redialtimes redialtimes-number

undo redialtimes

View Access number view

Parameter redialtimes-number: Number of redial attempts, in the range of 0 to 10. In the card number/password process, this argument may refer to the times of reselecting a language or redialing a card number, password, or a called number. In the caller number process with IVR, this argument may refer to the times of reselecting a language or redialing a called number.

Description Use the redialtimes command to configure the number of redial attempts in each dialing step for an access number.

Use the undo redialtimes command to restore the default number of redial attempts for an access number.

By default, the number of redial attempts in each dialing step is 2 for an access number.

The redialtimes-numberargument refers to the number of redial attempts, that is, the number of dial attempts is the number of redial attempts plus 1.

This command is unavailable in the caller number process

For the card number/password process, you can use the redialtimes command to set times of reselecting a language and times of redialing a card number, password, or called number. To make an IP call, a user first dials an access number, then selects a language, next enters a prepaid card number and password, and finally dials a called number. Any error in each dialing step may lead to a dialing failure.

For the caller number process with IVR, you can use the redialtimes command to set times of reselecting a language and times of redialing a called number.

Related command: gw-access-numberand process-config.

Example # Set the number of redial attempts to 4 for the access number 17909.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] dial-program

[Sysname-voice-dial] gw-access-number 17909 [Sysname-voice-dial-anum17909] process-config cardnumber

[Sysname-voice-dial-anum17909] redialtimes 4