3Com MSR 30, MSR 50 manual # Display Acfp rule information in order of policy, Establish

2514 CHAPTER 168: ACFP CONFIGURATION COMMANDS

Note the following:

■When you use this command to display ACFP rule information in order of policy, if you specify neither client ID nor policy index, the rule information of all the policies will be displayed.

■When you use this command to display ACFP rule information in order of outbound/inbound interface, if you specify no interface, the rule information for all the inbound interfaces or outbound interfaces will be displayed.

Example # Display ACFP rule information in order of inbound interface.

<Sysname> display acfp rule-info in-interface ethernet 1/0
In-Interface:	e1/0
ACFP rule total number:	1
ClientID:2	Policy-Index:2	Rule-Index:5
SIP:192.168.132.123	SMask:0.0.0.255	SPort:65500 to 65535
DIP:192.168.112.114	DMask:0.0.0.255	DPort:65500 to 65535
Protocol:ipinip	Establish:false	Fragment:false	Tos:1	Pre:1
Action:redirect	Status:active

# Display ACFP rule information in order of policy.

<Sysname> display acfp rule-info policy 1 1
ACFP Rule total number: 1
ClientID:1	Policy-Index:1	Rule-Index:1
SIP:192.168.132.122	SMask:0.0.0.255	SPort:65500 to 65535
DIP:192.168.112.115	DMask:0.0.0.255	DPort:65500 to 65535
Protocol:ipinip	Establish:false	Fragment:false	DSCP:AF11
Action:redirect	Status:inactive
Table 653 Description on the fields of the display acfp rule-info command
Field	Description
In-Interface	Inbound interface of the packet
Out-Interface	Outbound interface of the packet
ACFP rule total number	Total number of ACFP rules
ClientID	Client ID, index of client list
Policy-Index	Policy index
Rule-Index	Rule index
ContextID	Context ID
SIP	Source IP address
SMask	Inverse mask of source IP address
SPort	Source port number
DIP	Destination IP address
DMask	Inverse mask of destination IP address
DPort	Destination port number
Protocol	Protocol of the packet: GRE, ICMP, IGMP, IPinIP, OSPF, TCP,
	UDP, IP, and so on.
Establish	Whether the packet is a TCP connection establishing packet:
	true (TCP connection establishing packet) and false (indicates
	all the packets, not concerned about whether the packet is a
	TCP connection establishing packet)
Fragment	Whether the packet is a fragment: true (fragment) and false
	(indicates all the packets, not concerned about whether the
	packet is a fragment)