2272 CHAPTER 149: NQA CLIENT CONFIGURATION COMMANDS

Parameter interval: Interval between two consecutive tests, in milliseconds, in the range 0 to 604800000. If the interval is 0, it indicates that only one test is performed.

Description Use the frequency command to configure the interval between two consecutive tests for a test group.

Use the undo frequency command to restore the default.

By default, the interval between two consecutive tests for a test group is 0 milliseconds, that is, only one test is performed.

After you use the nqa schedule command to start an NQA test, one test is started at interval.

n If the last test is not completed when the interval specified by the frequency command is reached, a new test is not started.

Example # Configure the interval between two consecutive tests as 1000 milliseconds.

<Sysname> system-view [Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] frequency 1000

history-records

Syntax history-records number

undo history-records

View Any NQA test type view

Parameter number: Maximum number of history records that can be saved in a test group, in the range 0 to 50.

Description Use the history-recordscommand to configure the maximum number of history records that can be saved in a test group.

Use the undo history-recordscommand to restore the default.

By default, the maximum number of records that can be saved in a test group is 50.

If the number of history records exceeds the maximum number, the earliest history record for a probe will be discarded.

Example # Configure the maximum number of history records that can be saved in a test group as 10.

<Sysname> system-view

[Sysname] nqa entry admin test

Page 2272
Image 2272
3Com MSR 30, MSR 50 manual History-records, Syntax history-records number Undo history-records