3Com MSR 50, MSR 30 manual Lapb and X.25 Configuration Commands, Channel, X25 hunt-group

LAPB AND X.25 CONFIGURATION

26 COMMANDS

channel

Syntax	channel { interface interface-type interface-number [ dlci dlci-number ] xot
	ip-address }
	undo channel { interface interface-type interface-number xot ip-address }
View	X.25 hunt group view
Parameter	interface interface-typeinterface-number: Specifies an interface by its type and
	number.
	dlci dlci-number: Specifies an FR DLCI. The dlci-numberargument is in the range
	of 16 to 1007.
	xot ip-address: Specifies the IP address of the peer XOT host.
Description	Use the channel command to add an X.25 interface, Annex G DLCI or XOT
	channel to the current hunt group.
	Use the undo channel command to remove the specified interface, Annex G
	DLCI or XOT channel from the current hunt group.
Related command:	x25 hunt-group.
Example	# Add serial2/0 to the hunt group hg1.
	<Sysname> system-view
	[Sysname] interface serial 2/0
	[Sysname-Serial2/0] link-protocol x25
	[Sysname-Serial2/0] x25 x121-address 1111
	[Sysname-Serial2/0] quit
	[Sysname] x25 hunt-group hg1 round-robin
	[Sysname-hg-hg1] channel interface serial 2/0
	# Add Annex DLCI 100 to the hunt group hg1.
	<Sysname> system-view
	[Sysname] interface serial 2/1
	[Sysname-Serial2/1] link-protocol fr
	[Sysname-Serial2/1] fr dlci 100
	[Sysname-fr-dlci-Serial2/1-100] annexg dce
	[Sysname-fr-dlci-Serial2/1-100] quit