3Com MSR 30, MSR 50 manual Dlsw reachable-cache, Dlsw remote, Undo dlsw remote ip-address

346CHAPTER 21: BASIC DLSW CONFIGURATION COMMANDS

[Sysname] dlsw reachable saps 12 14

# Permit access to user-configured MAC addresses only.

[Sysname] dlsw reachable mac-exclusivity

dlsw reachable-cache

Syntax dlsw reachable-cache mac-addressremote ip-address

undo dlsw reachable-cache mac-addressremote ip-address

View System view

Parameter mac-address: MAC address of the SNA device connected to a remote peer.

ip-address: IP address of a remote peer.

Description Use the dlsw reachable-cachecommand to add the reachability information of the specified SNA device to the reachable-cache.

Use the undo dlsw reachable-cachecommand to remove the configured remote reachability information from the reachable-cache.

By default, no remote reachability information is configured.

This configuration allows the router to send frames to a remote peer without first polling it. When changes occur to the network of the remote peer, the configured reachability information needs to be updated.

Example # Add this remote reachability information to the reachable-cache: the IP address of the remote peer is 10.12.13.10, and the MAC address of the SNA device connected with it is 0102-2103-5641..

<Sysname> system-view

[Sysname] dlsw reachable-cache 0102-2103-5641 remote 10.12.13.10

dlsw remote

Syntax dlsw remote ip-address [ backup backup-address keepalive keepalive-interval linger minutes max-framemax-frame-size max-queuemax-queue-length priority priority ] *

undo dlsw remote ip-address

View System view

Parameter ip-address: IP address of the remote peer to be created.