3Com MSR 50, MSR 30 Frame Relay Configuration Commands, Display fr compress, Annexg dce dte

FRAME RELAY CONFIGURATION

22 COMMANDS

annexg

Syntax	annexg {dce dte}
	undo annexg {dce dte}
View	DLCI interface view
Parameter	dce: Specifies the DLCI interface as an Annex G DTE interface.
	dte: Specifies the DLCI interface as an Annex G DCE interface.
Description	Use the annexg command to configure the operating mode (Annex G DCE or
	Annex DTE) for a DLCI interface.
	Use the undo annexg command to remove the configuration.
	By default, a DLCI interface does operate in the Annex G DCE mode.
	ANSI T1.617 Annex G defines the way to transmit X.25 packets using FR virtual
	circuits. Similar to normal X.25 interface, an Annex G interface transmits/receives
	X.25 PVC and X.25 SVC packets and can operate as an X.25 switching interface.
	You can set LAPB-/X.25-related parameters for a virtual circuit by applying an X.25
	template to it.
Example	# Create an Annex G DTE interface.
	<Sysname> system-view
	[Sysname] interface serial 2/0
	[Sysname-Serial2/0] fr dlci 100
	[Sysname-fr-dlci-Serial2/0-100] annexg dte

display fr compress

Syntax	display fr compress [interface interface-type interface-number]
View	Any view
Parameter	interface interface-typeinterface-number: Specifies an interface by its type and
	number.