3Com MSR 50, MSR 30 manual Dhcp Server Configuration Commands

DHCP SERVER CONFIGURATION

51 COMMANDS

n	■ The DHCP server configuration is supported only on Layer 3 Ethernet interfaces
	(or subinterfaces), virtual Ethernet interfaces, VLAN interfaces, serial interfaces,
	and loopback interfaces. The subaddress pool configuration is not supported
	on serial and loopback interfaces.
	■ DHCP Snooping must be disabled on the DHCP server.
bims-server
Syntax	bims-server ip ip-address[ port port-number] sharekey key
	undo bims-server
View	DHCP address pool view
Parameter	ip ip-address: Specifies the IP address of a BIMS server.
	port port-number: Specifies a port number for the BIMS server in the range 1 to
	65534.
	sharekey key: Specifies a shared key for the BIMS server, which is a string of 1 to
	16 characters.
Description	Use the bims-servercommand to specify the IP address, port number, and
	shared key of a BIMS server in the DHCP address pool for the client.
	Use the undo bims-servercommand to remove specified BIMS server
	information from the DHCP address pool.
	By default, the related information of the BIMS server is not specified.
	If you execute the bims-servercommand repeatedly, the latest configuration will
	overwrite the previous one.
Related commands:	dhcp server ip-pool.
Example	# Specify the IP address 1.1.1.1, port number 80, shared key aabbcc of the BIMS
	server in DHCP address pool 0 for the client.
	<Sysname> system-view
	[Sysname] dhcp server ip-pool 0
	[Sysname-dhcp-pool-0] bims-server ip 1.1.1.1 port 80 sharekey aabbcc