3Com MSR 50, MSR 30 Data protect router-unix, Data read block, View Terminal template view, 901

901

<Sysname> system-view

[Sysname] rta template abc

[Sysname-rta-template-abc] bind vpn-instance vpn1

data protect router-unix

Syntax data protect router-unix

undo data protect router-unix

View Terminal template view

Parameters None

Description Use the data protect router-unixcommand to enable data encryption between the router and the FEP.

Use the undo data protect command to restore the default.

By default, data encryption is disabled between the router and the FEP.

In terminal access, you can configure whether to encrypt the data exchanged between the router and the FEP. The supported encryption algorithm is AES (advanced encryption standard) and the supported key length is 128-bit.

Example # Enable the data encryption between the router and the FEP.

<Sysname> system-view

[Sysname] rta template abc

[Sysname-rta-template-abc] data protect router-unix

data read block

Syntax data read block

undo data read block

View Terminal template view

Parameters None

Description Use the data read block command to enable data read blocking.

Use the undo data read block command to restore the default.

By default, data read blocking is disabled.

Note that, if data read blocking is enabled, when the router fails to send data from the terminal, the router stops receiving data from the terminal until the data is sent successfully.