3Com MSR 30, MSR 50 Debugging bgp update peer, Update message information of IPv6 labeled routes

1032 CHAPTER 73: BGP DEBUGGING COMMANDS
Local Pref	: 100
MED	: 0
Origin	: Incomplete
AS Path	:
Next Hop	: 100::2

22::22/128(1027)

// Update message information of IPv6 labeled routes

debugging bgp update peer

Syntax debugging bgp update peer { ipv4-address group-name } [ acl acl-number ip-prefixip-prefix-name ] [ receive send ] [ verbose ]

undo debugging bgp update peer { ipv4-addressgroup-name} [ receive send ] [ verbose ]

View User view

Default Level 1: Monitor level

Parameters ipv4-address: IPv4 peer address.

group-name: Peer group name.

acl acl-number: Filters the output message debugging information with the specified ACL.

ip-prefixip-prefix-name: Filters the output message debugging information with the specified IP prefix list.

receive: Enables/disables the debugging for the received BGP packets.

send: Enables/disables the debugging for the sent BGP packets.

verbose: Displays detailed debugging information.

Description Use the debugging bgp update peer command to enable BGP update message debugging for the specified peer/peer group.

Use the undo debugging bgp update peer command to disable BGP Update message debugging for the specified peer/peer group.

By default, this debugging is disabled.

Enabling debugging may affect system performance; therefore, use this command only when necessary and disable debugging once the debugging operation is complete.

Examples For Update message debugging information in different networking environments, see the related commands.