3Com MSR 30, MSR 50 manual Maximum load-balancing RIPng view, Related commands default cost on

1316 CHAPTER 85: IPV6 RIPNG CONFIGURATION COMMANDS

■You can configure a routing policy to redistribute only needed routes.

■You can specify a cost for redistributed routes using keyword cost.

Related commands: default cost on page 1280.

Examples # Redistribute IPv6-IS-IS routes (process 7) and specify the metric as 7.

<Sysname> system-view

[Sysname] ripng 100

[Sysname-ripng-100] import-route isisv6 7 cost 7

maximum load-balancing (RIPng view)

Syntax maximum load-balancing number

undo maximum load-balancing

View RIPng view

Parameters number: Maximum number of equal-cost load-balanced routes, in the range 1 to 8.

Description Use the maximum load-balancingcommand to specify the maximum number of equal cost routes for load balancing.

Use the undo maximum load-balancingcommand to restore the default.

n You need configure the maximum number according to the memory size.

Examples # Set the maximum number of equal cost load balanced routes to 2.

<Sysname> system-view [Sysname] ripng 100

[Sysname-ripng-100] maximum load-balancing 2

# Restore the default.

[Sysname-ripng-100] undo maximum load-balancing

preference

Syntax preference [ route-policyroute-policy-name ] preference

undo preference [ route-policy ]

View RIPng view

Parameters route-policy-name: Name of a routing policy, in the range of 1 to 19 characters.