3Com MSR 50, MSR 30 manual Related command cut connection Example, Display domain isp-name

1933

interface interface-typeinterface-number: Specifies all user connections of an interface.

ip ip-address: Specifies all user connections using the specified IP address.

mac mac-address: Specifies all user connections using the specified MAC address. The MAC address must be in the format of H-H-H.

ucibindex ucib-index: Specifies all user connections using the specified connection index. The valid range of the ucib-indexargument varies by device.

user-nameuser-name: Specifies all user connections using the specified username. The user-nameargument is a case-sensitive string of 1 to 80 characters and must contain the domain name. The system assumes that a username entered contains the domain name.

vlan vlan-id: Specifies all user connections in a VLAN. The VLAN ID ranges from 1 to 4094.

Description Use the display connection command to display information about specified or all AAA user connections.

n	■ If no argument is specified, this command displays information about all AAA
	user connections.
	■ This command does not apply to FTP user connections.
Related command: cut connection.
Example	# Display information about all AAA user connections.
	<Sysname>	display connection
	Index=1	,Username=telnet@system
	IP=10.0.0.1
	Total 1 connection(s) matched.
	Table 507 Description on the fields of the display connection command
	Field		Description
	Index		Index number
	Username		Username of the connection, in the format
			username@domain
	IP		IP address of the user
	Total 1 connection(s) matched.		Total number of user connections
display domain
Syntax	display domain [ isp-name]

View Any view