3Com MSR 50, MSR 30 manual Vlink-peer Ospf area view, Examples # Enable a stub-router, 1159

1159

Examples # Enable a stub-router.

<Sysname> system-view

[Sysname] ospf 100

[Sysname-ospf-100] stub-router

vlink-peer (OSPF area view)

Syntax vlink-peerrouter-id [ hello seconds retransmit seconds trans-delayseconds dead seconds simple [ plain cipher ] password { md5 hmac-md5} key-id [ plain cipher ] password ]*

undo vlink-peer router-id[ hello retransmit trans-delay dead [ simple { md5 hmac-md5 } key-id] ]*

View OSPF area view

Parameters router-id: ID of the neighbor router on the virtual link.

hello seconds: Hello interval in seconds, in the range 1 to 8192, which defaults to 10 and is identical to the value on its virtual link neighbor.

retransmit seconds: Retransmit interval in seconds, in the range 1 to 3600, which defaults to 5.

trans-delayseconds: Transmit delay interval in seconds, in the range 1 to 3600, which defaults to 1.

dead seconds: Dead interval in seconds, in the range 1 to 32768, which defaults to 40 and is identical to the value on its virtual link neighbor. The dead interval is at least four times the hello interval.

md5: MD5 authentication.

hmac-md5: HMAC-MD5 authentication.

simple: Simple authentication.

key-id: Key ID for MD5 or HMAC-MD5 authentication, in the range 1 to 255.

plain cipher: Plain or cipher type. If plain is specified, only plain password is supported and displayed upon displaying the configuration file. If cipher is specified, both plain and cipher are supported, but only cipher password is displayed when displaying the configuration file. By default, MD5 and HMAC-MD5 support cipher password, and simple authentication supports plain password.

password: Password of plain or cipher. Simple authentication: For plain type, a plain password is a string of up to 8 characters. For cipher type, a plain password is a string of up to 8 characters, and a cipher password is a string of up to 24 characters. MD5/HMAC-MD5 authentication: For plain type, a plain password is a string of up to 16 characters. For cipher type, a plain password is a string of up to 16 characters, and a cipher password is a string of up to 24 characters.