Chapter 6: Settings

Total Recall

Enabled - Automatic Off

When the hand-held enters suspend mode, the modem remains powered up. If the WORKABOUT PRO is not turned on again during the next 60 minutes, the unit briefly wakes up from unit mode, shuts down the modem, and enters unit mode again. This is the default mode.

Enabled - Always On

When the WORKABOUT PRO enters suspend mode, the modem remains powered indefinitely.

At the cost of a slightly increased power consumption in suspend mode, the modes where the modem remains powered up during suspend mode have several advantages. When the unit wakes up from suspend mode the modem is ready immediately– modem or network initialization is not required. A packet data session can then remain active during suspend mode. In these modes, the modem is also able to wake up the hand-held if the network status changes or there is incoming data on a packet session.

6.22 Total Recall

Total Recall is a Psion Teklogix utility developed to maintain applications and settings during cold boots. This utility is based on a backup and restore concept.

Tap on Start, Settings. Tap on the Total Recall icon.

Figure 6.57 Total Recall Screen

In the drop-down menu, you can choose from four options: Create Backup Profile, View Selected Profile, Restore Selected Profile and Delete Selected Profile. Keep in mind however that until a profile is created, the only available option is Create Backup Profile.

154Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual

Page 184
Image 184
Psion Teklogix 7525 user manual Total Recall, Enabled Automatic Off, Enabled Always On