Psion Teklogix 7525 5.2.1 Entering New Settings

Chapter 5: Connecting To A LAN With 802.11b
Entering New Settings
74 Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manua l
Note: To change network settings, tap the stylus on a network. If the network for
which you are looking is not listed, tap on ‘Add new...’ and follow the
instructions on the screen.
2. In the Networks to access drop-down menu, choose All Available,
Only access points or Only computer-to-computer depending on the
type of network(s) to which you connect.
3. To connect only to networks you have already configured, disable the
checkbox next to Automatically connect to non-preferred networks.
Note: If you choose to automatically connect to non-preferred networks, your
WORKABOUT PRO will detect any new networks and provide the
screens necessary to configure them.
5.2.1 Entering New Settings
A wireless network can be added manually or it can be added automatically when
the network is detected.
Note: If the network is automatically detected. you can skip step 1 and step 2.
1. To manually enter new settings, tap on Start , Sett ings. Tap on the Con-
nections tab.
2. Tap on the Network Cards icon. In the Wirel ess tab, tap on Add new.
3. In the General tab, type a network name. If a network was detected, the
network name is automatically entered and cannot be changed.
4. In the Connects to drop-down menu, choose what your network will
use to connect–Work or Internet.
5. To use an ad-hoc connection, enable This is a device-to-computer
(ad-hoc) connection.
6. Tap on OK to save your changes.