Psion Teklogix 7525 Disconnecting From a Network, Advanced Information, Entering a PIN Number

Chapter 6: Settings

Disconnecting From A Network

6.21.3 Disconnecting From A Network

To disconnect from the network:

•Tap on the Disconnect button, and then on OK.

When the WORKABOUT PRO network connection is severed, the Status field displays Ready to Connect.

A unit equipped with a GSM/GPRS expansion board displays the signal strength in the main Wireless WAN screen, even while a connection is active. Units equipped with Sierra Wireless Aircard modems do not display the signal strength while a connection is active.The Rx bytes and Tx bytes fields estimate the amount of data transmitted and received, respectively.

6.21.3.1 Shutting Down The Wireless WAN User Interface

While it is not usual to shut down the GSM/GPRS user interface, you can accomplish this by tapping on File menu and choosing the Exit command in the Wireless WAN screen.

Note: Once you’ve shut down the user interface, you can only enable the radio by tapping on the Wireless WAN icon to display the dialog box.

6.21.4 Advanced Information

In most cases, when a GSM/GPRS radio and SIM are installed in your hand-held, setup is automatic. Follow the steps outlined under the heading “Establishing A Connection” on page 143 to make a connection. The information in this section is for advanced setup purposes.

6.21.4.1 Entering A PIN Number

If a PIN is required, a PIN entry dialog box is displayed.

Figure 6.52 PIN Number

•Type your PIN, and press <ENTER>.

144Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual