Psion Teklogix 7525 Installation-Chargers And Docking Stations, Power Consumption Considerations

Chapter 9: Peripheral Devices & Accessories

Installation–Chargers And Docking Stations

9.3.1 Installation–Chargers And Docking Stations

When installing a charger or docking station at your site, consider the following guidelines.

•Keep chargers and docking stations away from excessive dirt, dust and contaminants.

•Chargers will not charge batteries outside an ambient temperature range of 0° C to 45 °C (32° F to 113° F). It is recommended that the charger or docking station be operated at room temperature–between 18° C and 25° C (64° F to 77° F) for maximum performance.

After unpacking your unit:

•Visually inspect the charger for possible damage.

•Install the IEC power cord and apply power.

9.3.2 Power Consumption Considerations

Check to ensure the mains circuit supplying chargers and/or docking stations is adequate for the load, especially if several chargers and docking stations are being powered from the same circuit.

•Quad charger–can consume up to 2A @ 120VAC or 1A @ 240VAC.

•Quad docking station–can consume up to 3A @ 120VAC or 1.5A @ 240VAC.

9.3.3 Operator Controls

WORKABOUT PRO docking stations and chargers have no operator controls or power switches.

9.3.4 Important Charger Safety Instructions

•SAVE THESE INSTRUCTIONS–This manual contains important safety and operating instructions for battery charger s.

•Before using the battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.

•The mains power cord shall comply with national safety regulations of the country where the equipment is to be sold.

•Use of an attachment not recommended or sold by the battery charger manufacturer may result in fire, electric shock, or personal injury.

282Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual