Psion Teklogix 7525 user manual LASER/LED Warnings

Approvals And Safety Summary

Important: Waste Electrical and Electronic equipment (WEEE) directive 2003/96/EC.

This Product, and its accessories, comply with the requirements of the Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC. If your end-of-life Psion Teklogix product or accessory was first placed on the European Union market after August 12th, 2005, contact your local country representative for details on how to arrange recycling.

For a list of international subsidiaries, please go to: www.psionteklogix.com.

LASER/LED WARNINGS

For your own safety, it is critical that you comply with the following warnings:

CAUTION

The laser/LED aperture is located in the front of terminal. Do not look into the laser/LED beam or point the beam at people or animals.

CAUTION

Using controls or adjustments, or performing procedures other than those speci- fied herein may result in hazardous radiation exposure.

CAUTION

The use of optical instruments with this product will increase eye hazard.

This product may contain a laser scanner that emits less than 1.4mW maximum radiant power at a wavelength of 650nm or 680nm.

DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE

Operating Psion Teklogix equipment where explosive gas is present may result in an explosion.

DO NOT REMOVE COVERS OR OPEN ENCLOSURES

To avoid injury, the equipment covers and enclosures should only be removed by qualified service personnel. Do not operate the equipment without the covers and enclosures properly installed.

For qualified personnel: Remove the battery pack before removing the cover and enclosures.

XIV Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual