Chapter 3: Getting To Know The WORKABOUT PRO

Monitoring The Battery And Maximizing Run Time

3.9 Monitoring The Battery And Maximizing Run Time

Note: When the main battery is at 50% capacity, a ‘low battery’ warning is dis- played. When the battery is at approximately 10% capacity, a ‘very low main battery’ notification bubble appears.

Under normal operating conditions, fully charged Standard Batteries hold a charge for up to 8 hours. High-Capacity batteries can hold a charge for up to 12 hours.

As Lithium Ion batteries age, their capacity decreases gradually, and they are gener- ally considered depleted after approximately 2 years of use (less than 60% of origi- nal capacity remaining). Keep in mind however that heavy usage or operating the unit at temperature extremes will shorten the battery life.

Lithium Ion batteries do not require conditioning cycles and the WORKABOUT PRO battery system (including chargers) requires no user interaction to maintain peak performance.

To maximize the run time of your batteries, consider the following:

The display backlight is the largest drain on the battery. Try to keep its brightness as low as possible.

The hand-held is ‘event’ driven—that is, when the unit is not in use, it reverts to sleep mode (even when it appears to be running), saving battery power. Events include a key press, touchscreen taps and scan triggers. Power consumption is reduced if you avoid unnecessary events, and allow the unit to sleep as much as possible.

The battery is a ‘smart battery’ with built-in intelligence.

Tapping on the Power icon under Start, Settings, System tab displays a dialog box that provides detailed information about the battery status of the main and backup batteries installed in your unit.

When the hand-held is switched off, it goes into a low-power, suspend state but continues to draw a small amount of power from the battery. This should not be an issue unless the unit is left in suspend state for more than a week—for long-term storage, the battery should be removed from the unit.

3.9.1 Storing Batteries

Long term battery storage is not recommended. If storage is necessary:

Always try to use a ‘first-in first-out’ approach to minimize storage time.

Lithium Ion batteries age much faster at elevated temperatures. Store batter- ies at temperatures between 0° C and 20° C.

Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual 39

Page 69
Image 69
Psion Teklogix 7525 user manual Storing Batteries, Monitoring The Battery And Maximizing Run Time