Psion Teklogix 7525 user manual Expansion Modules, Removing The End-Cap And Back Plate

Chapter 8: Expansion Modules

Expansion Modules

8.1 Expansion Modules

Easily installed expansion modules available for the WORKABOUT PRO allow you to customise this hand-held to meet your specific mobile computing requirements. This chapter outlines how to install the following expansion modules: PCMCIA, GSM/GPRS, SE 1223HP and SE 923HP scanner.

8.1.1 Removing The End-Cap And Back Plate

Warning:	The installation of this PC Card Expansion Module must be per-
	formed using the appropriate anti-static devices. If unavailable,
	discharge static from your body by touching a grounded metallic
	object before opening any covers on the unit.

To install a module, you’ll need to remove the end-cap and back plate on the WORKABOUT PRO. This is a simple process of unfastening four screws on the end-cap and six screws on the back plate.

Back plate End-cap

Battery Cover

SW1401

Power Switch

Figure 8.1 Disassembling The WORKABOUT PRO

Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual 261