Psion Teklogix 7525 user manual Options Imager, TekImager Enabled, Center Bar Code Only

Chapter 6: Settings

Imager

6.20.3 Imager

Figure 6.47 Imager

•Tap on the Scanner drop-down menu, and choose Imager.

6.20.3.1Options – Imager

TekImager Enabled

Setting this option to on enables the imager installed in your hand-held.

Dot Time (msec)

The value selected for “Dot Time (msec)” determines (in milliseconds) how long the targeting dot remains on before the scanner switches to a normal scan sweep. When you double-tap on this parameter, a dialog box is displayed in which you can enter a value of between 0 and 3000. A value of 0 disables the target dot.

Center Bar Code Only

Note: This parameter must be disabled when reading Composite bar codes.

When more than one bar code is visible in a single snap shot, this parameter allows you to specify that only the centre image within the imager framing marker will be read. When this parameter is set to on, the target dot is pointed at the centre image and only that image is returned.

132Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual