Chapter 3: Getting To Know The WORKABOUT PRO
Audio Indicators
38 Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manua l
If the unit is attached to an external power supply, the hand-held LED reflects the
battery charge status.

Table 3.1 WORKABOUT PRO LED BEHAVIOUR

3.8.2 Audio Indicators
The audio speaker provides a variety of sounds when a key is pressed, a keyboard
character is rejected, scan input is accepted or rejected, an operator’s entry does not
match in a match field or the battery is low. To specify how you want your WORK-
ABOUT PRO to respond under various conditions, refer to “Sound & Notifica-
tions” on page96.
The volume keys are located above <A> and <B> on WORKABOUT PRO C
models and
to the left and right of the arrow key on WORKABOUT PRO S models
.
The increase volume key is labelled with a plus symbol and the decrease
volume key is labelled with a minus symbol .

3.8.2.1 Adjusting Speaker Volume On The WORKABOUT PRO C

Press the <BLUE> key twice to lock the key ‘on’ and then, press <A>—the
increase volume key or <B>—the decrease volume key until
the volume meets your requirements.
Remember to press the <BLUE> key again to turn it ‘off’.

3.8.2.2 Adjusting Speaker Volume On The WORKABOUT PRO S

Press the <FN/BLUE> key twice to lock the key ‘on’ and then, press the
<RIGHT> arrow key—the increase volume key or the <LEFT>
arrow key—the decrease volume key until the volume meets your
requirements.
Remember to press the <FN/BLUE> key again to turn it ‘off’.

LED Behaviour Charge Status

Solid Green Charge complete.
Fast Blinking Green Charge in progress. Battery charged to less than 80%
capacity.
Slow Blinking Green Battery charged to greater than 80% of capacity.
Solid Red Temperature outside charge range (0° C to 50° C).
Blinking Red Battery is not charging. Battery fault.