Psion Teklogix 7525 user manual Ending a Connection, Proxy Server Setup

Chapter 6: Settings

Ending A Connection

6.24.5 Ending A Connection

•When connected through a modem or VPN connection, tap on the connec- tivity icon– –in the menu bar, and then tap on Disconnect.

•When connected with a cable or cradle, detach the cable from your WORK-

BOUT PRO.

•When connected through a network (Ethernet) card, remove the card from the WORKABOUT PRO.

6.24.6 Proxy Server Setup

Note: If you are connected to your ISP or private network during synchroniza- tion, the WORKABOUT PRO will download the appropriate settings dur- ing synchronization from your PC. If these settings are not on your PC, or if they need to be changed, you’ll need to set up the proxy server connec- tion manually.

To set up the proxy server connection manually, you’ll need the following information: proxy server name, server type, port, type of Socks protocol used and the user name and password.

1.Tap Start, Settings. Tap on the Connections tab followed by the Connec- tions icon.

2.Under My Work Network, tap on Set up my proxy server.

Figure 6.75 Proxy Settings Tab

3.Add a checkmark next to This network connects to the Internet and This network uses a proxy server to connect to the Internet.

170Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual