Lanier AP2610 manual Troubleshooting

5

Troubleshooting

Messages/Second messages	Description	Solution
Close	The front cover is open.	Close the front cover.
Front Cover
Close Rear/Paper	The paper exit cover or the	Close the paper exit cover or
Exit Cover	rear cover is open.	the rear cover.
Close	The cover of the Mailbox is	Close the cover of the Mail-
Mailbox Cover	open.	box.
Close Upper	The cover of the output 1-bin	Close the cover of the output
Tray Cover	Tray is open.	1-bin Tray.
Energy Save Mode	The printer is in Energy Saver	Wait for a while.
	mode.
Hardware Problem DIM	An error has occurred in the	First, turn the power switch
	printer.	off and then on. If the message
		appears again, call your sales
		or service representative.
Hardware Problem	An error has occurred in the	First, turn off the power
Ethernet	optional Network Interface	switch and then on. If the mes-
	Board.	sage appears again, call your
		sales or service representative.
		Turn off the power switch .
		Replace the Network Interface
		Board and turn on the power
		switch. See “Network Interface
		Board Type 2610” in the Setup
		Guide.
		Turn off the power switch, re-
		move the Network Interface
		Board and turn on the power
		switch.

Note

❒ If you remove the Net- work Interface Board, you cannot print over the net- work. You can send a print jobs to the printer only via a parallel cable connection.

62