Lanier AP2610 manual Printer configuration, Input Tray Name, Name Description

Error & Status Messages on the Control Panel

Printer configuration

You can check the printer configuration using telnet.

❖telnet

Use the info command.

❖UNIX

Use the info parameter of rsh, rcp, or ftp.

Reference

For more information, see “Remote Maintenance by Telnet (mshell)” in the Network Printing Guide is provided on the CD-ROM labeled “Operating Instructions”.

Note

❒“*” (asterisk) is displayed with the current setting.

❒Regarding *1–*6, see below table.

Item	Description
Printer System	Version of the printer
Network Board	Version of the network board
Input Tray
No.	ID number of the paper tray
Name	Name of the paper tray*1
PaperSize	Paper size loaded in the paper tray*2
Status	Current status of the paper tray*3
Output Tray
No.	ID number of the output tray
Name	Name of the output tray*4
Status	Current status of the output tray*5
Emulation
No.	ID number of the emulation used by the print-
Name	er
Version	Name of the emulation used in the printer
	Version of the emulation
Program
No.	ID number of the program
Name	Name of the program

❖*1 Input Tray: Name

Name	Description
Tray X	Name of installed paper tray. (X is the number
	of tray.)
Bypass Tray	Bypass Tray

5

73