Lanier AP2610 manual Tiff, 127

		System Menu
Menu		Description
Edge Smoothing	You can set whether Edge Smoothing is enabled. When it is on,
	jagged lines appear more smoothly. Set it to off when the print im-
	age contains fine gradation in tone.
	•	On
	•	Off

Note

❒Default: On

❒If "Toner Saving" is "On", "Edge Smoothing" is ignored even if it is "On".

Resolution You can set the print resolution in dots per inch.

❖PCL

300 dpi, 600 dpi

❖PS

300 dpi, 600 dpi, 1200 dpi

❖TIFF

200 dpi, 300 dpi, 400 dpi, 600 dpi, 1200 dpi

		Note
	❒ Default: 600 dpi
Toner Saving	You can select whether or not Toner Saving is enabled.
	•	On
	•	Off

		Note
	❒ Default: Off
	❒ If "Toner Saving" is "On", "Edge Smoothing" is ignored even if
		it is "On".
Spool Printing	You can select whether all of the print data is spooled to the Hard
	Disk Drive before printing.
	•	On
	•	Off

Note

❒Default: Off

❒Spooling stores the print job sent by a computer temporarily in the printer, transfers the print job, and then prints it.

❒This menu appears only when the optional Hard Disk Drive is installed.

6

127