Lanier AP2610 manual Terface cable, Network Connection

		Printer Does Not Print
Possible Cause		Solutions
Is the Data In indicator	If not blinking or lit, the data is not being sent to the printer.
blinking or lit after starting	❖ If the printer is connected to the computer using the in-
the print job?
	terface cable
	Make sure the following printer port settings are correct:
	•	For a parallel port connection, port LPT1 or LPT2 should be
		set.
	•	For a USB port connection, port USB00 (n) *1 should be set.
	•	For a IEEE 1394 (SCSI print) port connection, port
		1394_00(n) *1 should be set.
	*1	(n) is the number of printers connected.

•Windows 95/98/Me

A Click [Start], point to [Settings] and then click [Printers].

B Click to select the icon of the printer. Next, on the [File] menu, click [Properties].

C Click the [Details] tab.

D Check the [Print to the following port] box to confirm that the correct port is selected.

•Windows 2000

A Click [Start], point to [Settings] and then click [Printers].

B Click to select the icon of the printer. Next, on the [File] menu, click [Properties].

C Click the [Port] tab.

D Check the [Print to the following port] box to confirm that the correct port is selected.

•Windows XP

A Access the [Printers and Faxes] window from [Start] on the taskbar.

B Click to select the icon of the printer. Next, on the [File] menu, click [Properties].

C Click the [Port] tab.

D Check the [Print to the following port(s).] box to confirm that the correct port is selected.

•Windows NT 4.0

A Click [Start], point to [Settings] and then click [Printers].

B Click to select the icon of the printer. Next, on the [File] menu, click [Properties].

C Click the [Port] tab.

D Check the [Print to the following port] box to confirm that the correct port is selected.

❖Network Connection

Contact your network administrator.

5

77