Lanier AP2610 manual Allowed cable hops in a bus, Power supply, Protocol, Data Transfer Speed

Specifications

❖Allowed cable hops in a bus:

Maximum 16

❖Power supply:

Nonpower supply

Cable Power repeated (IEEE 1394a-2000 compliant)

802.11b Interface Unit TypeA (R-WL11)

❖Transmission Spec.:

Based on IEEE 802.11b (Wireless LAN)

❖Protocol:

TCP/IP, NetBEUI, IPX/SPX, AppleTalk

Note

❒ SmartNetMonitor and WebStatusMonitor are supported.

❖Data Transfer Speed:

Auto select from below speed 1Mbps, 2Mbps, 5.5Mbps, 11Mbps

❖Frequency Range:

• Inch version:	7
2412-2464 Mhz (1-11 channels)

•Metric version:

2412-2472 Mhz (1-13 channels)

❖Transmittable Distance:

1Mbps 400m *1 2Mbps 270m *1 5.5Mbps 200m *1 11Mbps 140m *1

*1 These figures are a guideline for outdoor use. In general, the transmittable dis- tance indoors is 10-100 m, depending on the environment.

❖Transmission Mode:

ad hoc mode and infrastructure mode

163