Lanier AP2610 manual ZGDM120J

Cleaning and Adjusting the Printer

E Slide the green lock lever to the left (A), so that the paper feed roller can be released (B).

ZGDM120J

F Wipe the rubber part of the roller with a soft damp cloth. After that, wipe it with a dry cloth to remove the water.

Important

❒Do not use chemical cleaner or organic solvent such as thinner or benzene.

G While sliding the green lock lever to the left (A), set the paper feed roller to its original position (B). After that, return the green lock lever to its original position (C).

ZCEM130J

H Move the printer to the place where it was placed. Carefully slide the paper tray into the print- er until it stops.

ZCEY150J

Important

❒ Do not slide the paper tray in
	5
with force. If you do, the front
and side guides might move.

I Insert the plug of the power cord into the wall socket securely. Connect all the cables that were removed in step B.

J Turn on the power switch.

Note

❒Follow the same procedure to clean the paper feed roller of the optional Paper Feed Unit.

Note

❒Confirm that the green lock le- ver secures the roller correctly by confirming that the roller ro- tates smoothly.

95