Lanier AP2610 manual Paper weight and number of sheets to be set

Paper and Other Media Supported by This Printer

•❍

Means that the size is supported but the paper size should be set with the con- trol panel. There is no dial on the tray.

See p.40 “Loading Paper in the Bypass Tray”

See p.47 “Loading envelopes into the Envelope Feeder Unit”

•✩

Means that the size is supported and indicated on the tray dial. Be sure to set the paper size dial to match the actual paper size loaded in the tray.

•★

Means that the size is supported but not indicated on the tray dial. You should set the tray dial to “p”, and select the paper size with the control pan- 3 el.

•❍*

Means that the supported size is approximately 3.55 - 12.00 inches in width, and approximately 5.83 - 17.00 inches in length. The supported size may dif- fer depending on the printer language you use. Use the printer driver to set custom sizes. Set custom sizes with the control panel.

•★**

Means that the supported size is approximately 7.16 - 11.7 inches in width, and approximately 5.8 - 17 inches in length. The supported size may differ de- pending on the printer language you use. Use the printer driver to set custom sizes. Set custom sizes with the control panel.

•X

means that the size is not supported.

❖Paper weight and number of sheets to be set

	Supported paper weight	Maximum number of
		sheets (plain paper) *1
Paper Tray	60 - 105 g/m2	250 (80 g/m2, 20 lb. bond)
	(16 - 28 lb. bond)
Paper Feed Unit Type 2600 (option)	60 - 105 g/m2	500 (80 g/m2, 20 lb. bond)
	(16 - 28 lb. bond)
Bypass Tray	52 - 162 g/m2	100 (80 g/m2, 20 lb. bond)
	(14 - 43 lb. bond)	For other kind of papers,
		see p.33 “Types of Paper
		and Other Media”.
Envelope Feeder Type 2600 *2	p.33 “Types of Paper and Other Media”.

*1

*2

Confirm that the top of the stack is not higher than the limit mark indicated on the side fence of the tray.

The Envelope Feeder Unit requires the installation of the optional Paper Feed Unit.

29