Lanier AP2610 manual Paper Recommendations, Loading Paper, Storing Paper

Paper and Other Media Supported by This Printer

Paper Recommendations

Note the following suggestions when handling or selecting paper used with this printer.

Loading Paper

•	Confirm the paper types of the printer. For more information, see p.33 “Types
	of Paper and Other Media”. Print quality cannot be guaranteed if other paper
	types are used.
•	Do not use paper that is already printed on.	3

•If you load paper into the paper tray, be sure not to stack over the limit mark.

•If you load paper onto the Bypass Tray, be sure that paper fits under the side guide.

•If you load paper into the paper tray, confirm that the print side is facing down.

•If you load paper onto the Bypass Tray, confirm that the print side is facing up.

Storing Paper

Paper should always be stored properly. Improperly stored paper might result in poor print quality, paper misfeeds or printer damage.

Recommendations are as follows:

•Avoid storing paper in humid areas.

•Avoid exposing paper to direct sunlight.

•Store on a flat surface.

•Keep open reams of paper in the package in which the paper came.

Types of Paper and Other Media

❖Plain paper

•If you print on paper heavier than 105 g/m2 (28 lb. bond), use the Bypass Tray. The Bypass Tray can hold paper up to 162 g/m2 (43 lb. bond) in weight.

•If you load paper heavier than 155 g/m2 (41 lb. bond) onto the Bypass Tray, set the printer to Thick Paper mode using the control panel.

•If paper is curled or bent, correct it before loading.

33