Using the Configuration Utility (continued)

Home > Authentication (continued)

Enable

DHCP Selecting this option activates the device’s built-in DHCP server. Server: Configure the DHCP server with the following properties:

DHCP Pool

Enter the starting IP address, from which group of addresses

Start IP

the DHCP server will assign IP addresses to the DHCP-

Address:

enabled devices (clients) on the network.

DHCP Pool

End IP

Address:

Lease Time:

Domain

Name:

WINS IP

Address:

Preferred DNS Server:

Alternate

DNS

Server:

Enter the last IP address in the sequence of addresses from which the DHCP server will assign addresses.

Select the length of time during which the DHCP assigned address will be in effect.

Enter the domain name.

Enter the WINS server’s IP address.

Enter the IP address of the preferred DNS server.

Enter the IP address of the alternate DNS server.

Enable

DHCP

Relay: Select this mode to specify another DHCP server’s IP address.

22

Page 22
Image 22
D-Link DSA-3100 manual Home Authentication, Enable