Using the Configuration Utility (continued)

Tools > System

Allows you to make a backup and restore the backup copy to the DSA- 3100. This function also enables you to restore the DSA-3100 back to the factory default settings.

Create Backup Image: Make

a backup Image file.

Restore Setting From File: Browse the hard drive to restore the backup image file. (Important:The image must be created by the DSA-3100.)

Reset To Factory Default: Click Reset to restore the DSA-3100 back to the factory default settings.

Tools > Firmware

Please click the link in the configuration screen shown here to check for firmware upgrades on the D-Link website. After you download the new firmware file to your hard drive, click Browse and then click Apply to upgrade the firmware.

1.79B2

Caution:

Firmware upgrades might result in configuration data

loss. Some other restrictions might also apply. Please refer to the release notes of new firmware upgrades. When the system is upgrading its firmware, the Status LED blinks until done. When finished, the web interface will display a

successful message.

Please restart the DSA-3100 using the admin- istration interface. Do not directly power it off and on. Restarting the DSA-3100 in this way

after a firmware upgrade might result in corruption of the DSA-3100 firmware. (Online user sessions will be terminated when the system restarts.)

48

Page 48
Image 48
D-Link DSA-3100 manual Tools System, Tools Firmware