Using the Configuration Utility (continued)

Advanced > Pass-Through

To maintain an adequate level of security, each client on the network can be managed. To allow some devices to be unmanaged, input their IP addresses or MAC addresses in this interface. Up to 20 IP ad- dresses and 10 MAC ad- dresses can be assigned unmanaged access. MAC address format is XX:XX:XX:XX:XX:XX

Caution: Allowing unmanaged access from specific IP or MAC addresses could adversely affect the security of your network.

Advanced > Virtual Server

This feature allows you to define up to 10 virtual servers to enable access to servers connected to the authentication and local network port from outside of the managed network. Depending on the service provided, the service might run on TCP ports, UDP ports or both. Click Enable to activate the rule. Changes to the settings of virtual servers will take effect immediately after you click the Apply button.

Note: Each local server connected to the authentication port must also be allowed IP or MAC address pass-through. Please enter its IP or MAC address via the interface shown in the pass-through configuration screen.

38

Page 38
Image 38
D-Link DSA-3100 manual Advanced Pass-Through, Advanced Virtual Server